Terms & Conditions, Conditions of Use, Warranties, Trademarks, Liability, Use of Website Statements

 

Privacy & Website Statement 

   About Us    
 

AMERITRONICS® is a division of the Jacks’ Technologies & Industries Corporation (JTI).

AMERITRONICS® is a stocking distributor of the entire Zephyrtronics®, along with OK International, Metcal® soldering equipment, Pen-Vac® vacuum lifting and laboratory products, TopLine® products, Scienscope™ equipment and a wide selection of premium products, tools and supplies especially for the electronic bench-top.

Unlike many distributors, we do not try to sell everything under the rainbow. Instead, we are focused only on the electronic bench-top and the engineers and technicians who work there.

Further, our Customer Service personnel are highly-trained and ready to help you with your bench-top applications.

REACH US AT:

Ameritronics
®
909-865-2595 Phone
562-470-6978 Fax
email:
sales@ameritronics.com

Ameritronics works very hard to have all of our catalog items in stock so that we an ship immediately. However, as with all businesses, we occasionally, albeit very rarely, have demand that outpaces our production capacity and occasionally must backorder. Most orders ship on the same day we receive them here at our factory and 98% of the balance of our orders ship within 3 days. If we can not deliver your item within that timeframe, we will make every effort to inform our customers of any foreseen delay. Because our equipment is highly specialized, Ameritronics reserves the right to refuse to sell our products to anyone at our discretion. Thank you!

 

 

 
 
©1996 - 2011, 2012, 2013, 2014, 2018, 2019, 2020-2023 Ameritronics®. All rights reserved. The information and all images you receive online from Ameritronics® is protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Ameritronics® is the registered trademark property of JTI, Inc. "Zephyrtronics" and  "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" and "PostCooler" and "AirBath" and "Quatro" and "Full Metal Jacket" are the protected trademark property of JTI, Inc Revised for September 13, 2022
 

PCB, SMD, BGA Rework & Prototyping
AirBath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT / SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixtures, Board Cradles, Rework Solder Paste,  No-Clean Solder Paste, Low Melt® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT-SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger

How To Work With SMD's, CSP's, BGA's & QFN's
How To - BGA Alignment: How To - SMT Rework: How To - PCB Preheating, How To - BGA  & CSP Rework: How To - Quickly Solder SMD Packages Effectively: How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional: How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP: How To - Solder & Rework Ceramic Capacitors: How To - Solder & Rework Glass Diodes

PCB Soldering, De-Soldering
Soldering Accessories, Solder Wire, No-Clean Solder Wire,  Soldering  Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, LowMelt® DeSolder Wire, De-Solder Wire, Soldering Irons, Digital De-Soldering, Soldering Tips, Thru-Hole DeSoldering Tools, Desoldering Tip, Tips for Desoldering, De-Solder Wick, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Pre-Heating Systems, Preheat Thru-Hole, PCB Pre-Heating, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Preheaters for Lead-Free Rework and Soldering

Dispensing, Solder Paste, Liquids & Fluids
Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Tips,  Blunt Needles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Dispensing Accessories, Solder Paste in Syringe, Lead-Free Solder Paste in Syringe, Paste Rack™ Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Automatic Dispensing

Laboratory  & Bench  Supplies & Tools
SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits