The ZT-5100 Auto/Manual Dispenser Is Fabricated Out of Metal (No Thin Walled Plastic Side Panels) With An Industrial-Grade Enamel Finish. "A Tool, Not a Toy."

Reliable, Low-Cost & Simple Dispensing: Whether your job requires high-volume, repetitive and precision dispensing or low-volume prototyping where accurately dispensed shots are still critical, the  ZT-5100 Air Mill™  is your easy-to-use and economically-priced dispensing system. And it's encased in an industrial full metal casing of military quality and not within a cheap thin-wall plastic casing that easily can crack during industrial use (see photos below).

The ZT-5100 provides both fully automatic dispensing with its front panel timer dial, and manual activation one shot at a time by foot pedal. The system puts you in control and makes it all simple for you.

Dispenses Most Liquids! Ideal for dispensing most all liquids from barrels or syringes, the ZT-5100 dispenses solder pastes, thermo-conductive adhesives, fluxes, lubricants, epoxies, cyanoacrylate, sealants, welding creams, glues, silicones and more.

Understanding the common pitfalls that technicians deal with at the bench, our engineers packaged together this smart looking, economical and highly utilitarian product so you can 'getting it right' when dispensing.

Air Power Beats Hand Power! The ZT-5100 Air Mill™ puts the advantages of air power, adjustable air pressure and digital pulse timing at your fingertips giving you a cleaner operation with far more consistent and repeatable fluid deposits than with manual methods and devices.

Tired of Hand Dispensing With a Syringe and Your Thumb? No more struggling with difficult manual dispensing methods and tools. No more fretting about inconsistent deposits. No more hand fatigue from manipulating syringes and squeezing tubes. No more guess work and "eyeballing" your fluid deposits. The ZT-5100 Air Mill™ is a premium, precision fluid dispensing system for most all viscosities of fluids featuring digital timing control for reproducibility and regulated vacuum helping prevent unwanted drippings.

Two Dispensing Modes: Automatic & Manual Shots: And for those dispensing tasks that sometimes require some "eyeballing" and/or line beading, the ZT-5100 AirMill™ features an illuminated timer bypass switch and a foot pedal for manual operation. (The foot pedal is standard equipment).

 
  Electrical Rating:
  Model ZT-5100-120:  120 VAC  / 60 Hz. 3- Wire (U.S.A.)
  Model ZT-5100-230:  230 VAC / 50 Hz. 3-Wire (Int'l)

  Other:
  W x H x D:  8.75" x 4.0" x 8.5" (22 cm x 10 cm x 21 cm)
  Weight:   4.5 lbs (2.04 kilos)
  Digital Timing:  Programmable (0.01-1; 0.1-10; 0.2-20 & 0.3-30 seconds)
  Cycle Initiation:   Momentary (Manual) or Continuous (Timer)
  Repeat Tolerance:   0.1%
  Air Input:   70-100 psi (5-7 bar)
  Air Output:   1-100 psi (0.1-7 bar)
  Construction:   All Metal ESD Safe Construction
  Foot Pedal Power:   24 Volts

(For the U.S.A., Canada & Mexico)

(For All International Customers)

The Power Palm Plunger

(Click Photo for More Options & Details)

PPP-2000

$25.00

12 (TWELVE) ECONO PLUNGERS

(Click Photo for More Options & Details)

ECO-1012

24 VOLT FOOT PEDAL FOR ZT-5100 AIRMILL™
(Not for use with other products)

ZT-5-572

$29.85

POWER CORD
REPLACEMENT FOR ZT-5100 AIRMILL™
(Not for use with other products)

ZT-5-777

$7.99

SNAP-LOCK STYLE
TEN PACK
3cc/5cc/10cc/30cc/55cc

$175.00

$175.00

$185.00

$185.00

TWIST-LOCK STYLE
TEN PACK
3cc/5cc/10cc/30cc/55cc