The Original BGA Flux™   Liquid PC Board Soldering & DeSoldering Helps Prevent Hydro-Planing
BGA FLUX

Liquid Soldering Flux
BGA Soldering Flux in Bottles or Cans

 

Are you dealing soldering or desoldering Ball Grid Array’s or QFN's at the electronic benchtop? There's no need to be frustrated worrying about which flux to use with your BGA’s? Stop worrying! The BGA Flux is here and in convenient 2-ounce bottles for your critical PC board soldering and desoldering jobs at the bench.  The BGA Flux is superb when used with  low-velocity hot air reflow SMD & BGA equipment and tools (Zephyrtronics ZT-7 BGA & SMT Reflow System).

 

It is an RMA flux that is more “active” than most rosin fluxes, yet without the conductivity typically associated with RMA's...making it ideal for soldering tiny devices. The tightly controlled surface tension of the BGA Flux yields a uniform head of tiny bubbles under the chip when heated with low-velocity hot air enhancing the BGA process.

BGA Flux, RMA Flux
The BGA Flux Can Ship Out Today

 
 

BGA FLUX™

Description

QTY

Buy Now

BGA Flux
 
BGA Flux, Rework Flux
Ships With
 MSDS Docs

RMA-0002
(Bench Size
2 oz. Bottles)

$17.95

RMA-SXPK
 SIX PACK
of
2 Oz.
Bottles

$96.93
 (SAVE 10%)

RMA-0226
8 Ounce
Can

$66.10
(SAVE 15%)
 

BGA Flux™ Technical Data

RMA Formulation
Low  Residue
Micro Bubbling at Activation
Uniform Head at Flux Activation
Virtually Inert When Dry
Non-Conductive When Dry
Non-Corrosive When Dry
Moisture and Fungus Resistant
Long Shelf Life
Exceeds MIL-Spec F-14256

Reduced Defects
Ideal for BGA, SMD & CSP
Helps Prevent Hydro-Planing
Cleaning Quick & Easy

Compliments LOWMELT
®
BGA Pad Redressing
Enhanced Board Cosmetics
High-Quality Soldering

 
AT-001 Flux Dispenser Squeeze Bottle With Needle

Item

Description

QTY

Price

Buy Now

Dispensing Bottles, Squeeze Bottles, Luer, Flux Dispenser, Needle
60ml
2 Oz

Flux Squeeze Bottle With a
20-gage dispensing needle within screw-cap for precise drops of flux, solder mask, adhesives, silicones, other liquids and oils.

Transparent. Easy to re-fill and stand-up design. Polyethylene with rounded edges (Boston-style). More needles

Single
AT-001
$5.00

Two Pack
AT-001-2
$9.00

Six Pack
AT-001-6
$25.50

12 Pack
AT-001-12
$48.00

 
 
Rework, Repair,  PCB Soldering
Equipment & Tools

BGA & SMD
BGA Rework, SMD Rework, Hot Air Station

PCB Preheaters

PCB Preheaters, Bottom-Side Pre-heat

PCB Fixtures
PCB Fixture 3-Track

Fume Extractors

Flush Cutters

Hot Air Pencil
Hot AirPencil, SMD Soldering Station

The PasteRack
Solder, Paste, Storage, Rack

Auto Dispenser
Autotamic Dispenser for Dispensing Liquids, Pastes, Fluids, Epoxies and More

Hot Air Rework
Digital SMD Hot Air Soldering Rework Station

Quality Magnifiers
ESD Safe, Lighted Magnifier, Magnifying Lamp, Diopter, Bench

De-Soldering
DeSoldering Station, Digital DeSoldering Stations, Temperature Control DeSoldering, DeSolder, Rework, Thru-Hole, Repair, Through-Hole, Low Price

Vacuum Pick-Up
Vaccum Pick Up Tool, SMD, PCB

QFP Straightener
Topline, QFP Lead Straigtener

Solder Suckers
ESD Solder Sucker, DeSolder Suckers

Soldering Supplies for the Electronic Bench

Solder Paste
Rework, Solder, Paste

LowMelt®
DeSolder Wire

LowMelt ®, DeSoldering Wire, SMD Removal

Solder Wire
Soldering Wire, Tin, Lead, Lead-Free, 1 Pound Spools

Dispensing Bottles
Squeeze, Pump, Bottles

Soldering Tips
Soldering, Tips, Replacement, Solder, Cartridges

Solder Sponges
Sponges, Natural Cellulose Sponges

Fluxes/Solvents

DeSolder Wick
Solder Wick, Desoldering, Braid

Dispensing Needles & Tips
Dispensing Needles, Blunt Needles, Plastic Tapered Tips, Industrial Dispensing Needles, Stainless Steel Needles

10cc Plungers

Dispensing Barrels

©1996 - 2011, 2012, 2013, 2014-2016 Ameritronics®. All rights reserved. The information and all images you receive online from Ameritronics® is protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Ameritronics® is the registered trademark property of JTI, Inc. "Zephyrtronics" and  "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" and "PostCooler" and "AirBath" and "Quatro" and "Full Metal Jacket" are the protected trademark property of JTI, Inc.

Revised for November 21, 2016

Click link below to return to the top of the page
BGA FLUX™

PCB, SMD, BGA Rework & Prototyping
AirBath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT / SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixtures, Board Cradles, Rework Solder Paste,  No-Clean Solder Paste, Low Melt® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT-SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger

How To Work With SMD's, CSP's, BGA's & QFN's
How To - BGA Alignment: How To - SMT Rework: How To - PCB Preheating, How To - BGA  & CSP Rework: How To - Quickly Solder SMD Packages Effectively: How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional: How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP: How To - Solder & Rework Ceramic Capacitors: How To - Solder & Rework Glass Diodes

PCB Soldering, De-Soldering
Soldering Accessories, Solder Wire, No-Clean Solder Wire,  Soldering  Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, LowMelt® DeSolder Wire, De-Solder Wire, Soldering Irons, Digital De-Soldering, Soldering Tips, Thru-Hole DeSoldering Tools, Desoldering Tip, Tips for Desoldering, De-Solder Wick, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Pre-Heating Systems, Preheat Thru-Hole, PCB Pre-Heating, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Preheaters for Lead-Free Rework and Soldering

Dispensing, Solder Paste, Liquids & Fluids
Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Tips,  Blunt Needles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Dispensing Accessories, Solder Paste in Syringe, Lead-Free Solder Paste in Syringe, Paste Rack™ Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Automatic Dispensing

Laboratory  & Bench  Supplies & Tools
SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits