SMT TWEEZERS & PRECISION PROBES
 

     
       

Our Premium SMT Alignment Probes, Tools and SMT Tweezers

          

Order Securely
On-Line

  

Non-Magnetic, Stainless Steel Premium Tools
 At Last! Precision, Durability, & Quality Tools for the Electronic Benchtop!

  

Order Securely
On-Line

The mark that we are only a good as our tools certainly applies when working with the tiny microelectronic devices common at today's electronic bench. Our engineers carefully set out to select the most utilitarian and commonly used precision probes and tweezers at the electronic bench. The result?

Below are two sets of tools: the SDP-111 Set of 4 Probes and the ZT-2-010 Set of 2 Tweezers which meet most bench applications during prototyping, low volume production, and rework of PCB's.

These tools are fabricated from acid-resistant, non-contaminating, rust-free, stainless steel. And, yes they are non-magnetic so they can be used with micro electronic devices and CMOS sensitive components.

    
The SDP-1111 SMT Probe Set: Set of 4 Precision, Stainless Steel Probes

6-PIECE PROBE & TWEEZER SET

DESCRIPTION

QTY / ITEM

PRICE

BUY NOW

6-PIECE SET OF
 4 PRECISION
STAINLESS
PROBES &
2 SMT TWEEZERS

 STP-SET
6-PIECE SET
of
4 PROBES &
 2 TWEEZERS
 SAVE 10%

$22
STP-5PK
5 of the
 6-PIECE SETS
 SAVE 20%

$96

4-PIECE PRECISION PROBE SET

DESCRIPTION

QTY / ITEM

PRICE

BUY NOW

NON-MAGNETIC
SMALL PARTS
TWEEZER SET		 SDP-1111 SET OF 4 PROBES

$12
SDP-5PK
5 OF THE
4-PIECE PROBE SETS
SAVE 10%

$54

2-PIECE SMT TWEEZER SET

DESCRIPTION

QTY / ITEM

PRICE

BUY NOW

NON-MAGNETIC
SMALL PARTS
& SMD
TWEEZER SET		 ZT-2-010 SET OF 4 PROBES

$12
ZT-2-5PK
5 OF THE
2-PIECE PROBE SETS
SAVE 10%

$54


Here is our set of four premium quality probes assembled together in our SDP-111 Set. Each tool is notable in that it is manufactured from non-corrosive, non-magnetic and acid-proof stainless steel. This means long term durability and wear-resistance dependability at the bench. Further, these stainless steel tools are ideal for critical ESD requirements.

The Utilities and Applications: The SDP-111 Set is most useful at straightening bent leads on QFP's or SOIC's; redirecting solder bridges between leads of SMD's; fine tuning component alignment to the PCB pads; testing solder joint strength; and more. (Note: Never use probes while working on live circuits.)

   

The Features: Each tool features a dual combination of working tool ends maximizing utility for the technician, providing 8 tool ends for most every application. The standard 6.5 inch (16.5 cm) length of all 4 tools is easy to manipulate and popular for working with small SMT devices.

 The Variety: The 8 configurations of working ends include 90°, 45°, straight, curved, hooked and pointed providing a wide array of utility in these lightweight, but sturdy stainless tools.
The SDP-1111 SMT Probe Set:
Set of 2 Premium Stainless Steel Tweezers

It seems that everyone has tweezers to peddle these days. So what distinguishes ours from the rest? Plenty. First, we did our homework.

Universality: We researched and tested what seems just about every tweezer there was. Drawing on over four decades of collective experience at the electronic benchtop, our engineering group then carefully set the design criteria for the "essential tweezers" selecting the two most useful tweezer designs yielding the greatest universal applications possible.
   

Our ZT-2-010 Tweezers are fabricated of stainless steel, the tweezers working ends are in the two most popular styles that offer the most widespread applications: 90° (Right Angled) and Curved, and there are no serrations that can scratch, score and damage microchips.

There Are Some Critical Design Features When Selecting Tweezers:  Each of the design elements are significant and required when handling microelectronic devices. The ZT-2-010 Tweezers are non-magnetic, non-corrosive, and acid-proof stainless steel. Stainless steel construction is impervious to the common fluxes, flux removers and solvents typical at the bench. Further, stainless steel helps repel molten solder (plated copper tweezers eventually wear and solder will stick to the copper). Both tweezers are heat resistant and completely ESD safe, unlike many plastic tweezers.
 
6-Piece Probe & Tweezer Set  Comprehensive 4 Precision Probes & 2 Tweezer Set

Here's our best value! Save 10% and pick up both the 4 precision probes and 2 tweezers described above. This is our comprehensive  STP-SET Six Piece Set of Probes & Tweezers. Remember there are no minimum orders with us here at Zephyrtronics and we can typically ship the very same day your order is received.

   
    ©1996 - 2007 Ameritronics®. All rights reserved. The information you receive online from Ameritronics® is protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Ameritronics® is the registered trademark property of JTI, Inc. "Zephyrtronics" and  "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" are the protected trademark property of JTI, Inc.    
   

SMD Rework, SMT Rework
AirBath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT / SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixtures, Board Cradles, Rework Solder Paste,  No-Clean Solder Paste, Low Melt® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT-SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger

How To - SMT, CSP, BGA Rework
 How To - BGA Alignment: How To - SMT Rework: How To - PCB Preheating, How To - BGA  & CSP Rework: How To - Quickly Solder SMD Packages Effectively: How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional: How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP: How To - Solder & Rework Ceramic Capacitors: How To - Solder & Rework Glass Diodes:

Soldering, De-Soldering
 Soldering Accessories, Solder Wire, No-Clean Solder Wire, Eutectic Solder Wire, Solder Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, LowMelt® DeSolder Wire, De-Solder Wire, Soldering Irons, Digital Soldering Station, Digital De-Soldering, MIL-Spec Soldering Station: ESD Soldering Station, Soldering Tips, Thru-Hole DeSoldering Tools, Desoldering Tip, Tips for Desoldering, De-Solder Wick, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Pre-Heating Systems, Preheat Thru-Hole, PCB Pre-Heating, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Preheaters for Lead-Free Rework and Soldering

Dispensing
 Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Tips,  Blunt Needles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Dispensing Accessories, Solder Paste in Syringe, Lead-Free Solder Paste in Syringe, Paste Rack™ Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Automatic Dispensing

Benchtop Accessories, Bench Supplies, Benchtop Tools
SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits