|
|




 |
|
|
|
|
|
|
|
|
|
Non-Flammable Flux Remover Flux Solvent
PCB Cleansing Agent PCB Flux
Remover De-Fluxer |
|
| |
|
NON-FLAMMABLE FLUX
REMOVER |
|
|
|
|
|
Our Very Popular Gentle, Yet
Highly Effective Cleansing Agent for PCB’s |
|
|
|
|
|
|
 |
The NFR Series of
Non-Flammable Flux Remover
and Solvent
An Ideal Cleansing Agent for
PCB's:
It's
Non-Flammable!
And this flux
remover is
an all-purpose
cleaner that cleans and removes light oils, silicones,
waxes, greases and similar contaminants from PC boards
typical within electronics manufacturing.
Certainly
one of the key components with any successful PCB
assembly work (whether prototyping, low volume
production, or rework) depends on proper cleansing both
the substrate and components after solder reflow.
Zephyrtronics has made this critical process so much
easier with the introduction of the new
Non-Flammable Flux Remover, just maybe the
most ideal cleansing agent to date developed for the
electronic bench top.
Gentle,
But Excellent Flux Cleaning Properties:
Our
Non-Flammable Flux Remover
is a gentle, yet extremely effective flux
cleansing agent which
cleans most all of the common
fluxes found at the bench including R, RA, RMA, Synthetic and
Organic Fluxes.
|
|
The
NFR Series of
Non-Flammable Flux Solvent
in 2 Oz., 8 Oz.
& 1-Gal Containers |
|
|
|
|
|
More Details:
A
Brief History: While
most all flux removers were developed for
high-volume production reflow machines which can
include harsh agents, our
Non-Flammable Flux Remover
is ideal for use at the electronic bench where
prototyping and rework takes place. This
is especially important where and technicians
work with hot gas and hot electrical tools
because our NFR Series
is non-flammable.
So Many Excellent Cleaning Properties:
It is important to note that this
Non-Flammable Flux Solvent
is
non-corrosive,
and best of all has
rapid
evaporation properties
right at room temperature. Moreover, while on
one hand, it is a very
gentle solvent, it is still most
effective at cleaning away silicons, grease,
oil, films, and even ionic soils from the PCB
assembly after soldering or de-soldering.
And
this is the cleansing agent recommended for use
with
LOWMELT®
DeSolder Wire during SMT and Thru-Hole PC Board
Work or with critical BGA pad redressing. |
|
|
|
NON-FLAMMABLE FLUX REMOVER |
|
Description |
Item |
Price |
Buy Now |

|
 |
|
NON-FLAMMABLE
FLUX REMOVER
SHIPS WITH MSDS |
|
NFR-0056
NON-FLAMMABLE
FLUX REMOVER
In Handy 2 Oz.
/59ml
Bottles
|
$19.85
|
|
|
NFR-2PAK
NON-FLAMMABLE
FLUX REMOVER
In Two Handy 2 Oz.
59ml
Bottles
SAVE 5%!
|
$37.71 |
|
|
NFR-SXPK
NON-FLAMMABLE
FLUX REMOVER
6-Pack of 2oz. Bottles of Flux
SAVE 10%!
|
$107.19
|
|
|
NFR-S226
NON-FLAMMABLE
FLUX REMOVER
In Econo 8 Oz./239ml Cans
SAVE 15%!
|
$67.49
|
|
|
NFR-SGAL
NON-FLAMMABLE
FLUX REMOVER
Gallon / 3.8 Liter Can
|
$385.00
|
|
|
|
Enhanced PC Board Cosmetics: Whether you are
working with no-clean or more traditional fluxes,
whether they are mild or active fluxes, whether they are
organic or synthetic fluxes, whether they are RMA, R or
RA fluxes,
the NFR Non-Flammable Flux
Remover cleans the PCB and leaves a
cosmetically improved substrate afterward. |
|
|
ATE-40
SINGLE TOUCH ESD PUMP DISPENSER |
|
Item |
Description |
Qty. |
Price |
Buy
Now |
|

100ml
3.4 Oz
 |
Small, single
touch pump top bottle for solvents, cleaners and
alcohol. Ideal for clean rooms and PCB
soldering work. Helps prevent wasteful evaporation &
contamination. Exceeds all MIL-Specs. Stainless
steel hinged lid is included! Bottle is non-reactive
polyethylene and is ESD-Safe. Resistance Specs: 106
-
109Ω |
Single
ATE-40 |
$9.00 |
|
Two Pack
ATE-40-2 |
$17.00 |
|
Six Pack
ATE-40-6 |
$49.00 |
|
12 Pack
ATE40-12 |
$91.00 |
|
|
|
|
TECHNICAL
DATA & SPECS |
Product Name: Non-Flammable
Flux Remover
Features:
Non-Flammable Solvent
Gentle Cleansing Properties
Rapid Evaporation at Room Temp
No Residue
Developed for the Electronic Bench Top
Non Corrosive
Cleans:
Type R Fluxes, Type RA Fluxes,
Type RMA Fluxes,
Synthetic and Organic Fluxes
Silicons, Grease, Oil, Films
Ionic Soils
Benefits: Compliments
LOWMELT®
DeSolder
2 Oz Bottles Eases Use With Swabs
Enhanced Board Cosmetics
Reduces PCB Defects |
|
|
|
|
|
ATE-60
SINGLE TOUCH ESD PUMP DISPENSER |
|
Item |
Description |
Qty. |
Price |
Buy
Now |
|

200ml
7 Oz
 |
Mid-size,
single touch pump top bottle for solvents, cleaners
and alcohol. Ideal for clean rooms and PCB
soldering work. Helps prevent wasteful evaporation &
contamination. Exceeds all MIL-Specs. Stainless
hinged lid is included! Pump bottle molded in
non-reactive, static-dissipative polyethylene and is
ESD-Safe. Resistance Specs: 106 -
109Ω |
Single
ATE-60 |
$10.00 |
|
Two Pack
ATE-60-2 |
$19.50 |
|
Six Pack
ATE-60-6 |
$54.00 |
|
12 Pack
ATE60-12 |
$96.00 |
|
|
|
|
Why work with flammable flux removers when you can work
with an equally good one that is non-flammable? Each
order ships right from our factory to you
with all your MSDS docs. Our
NFR Non-Flammable Flux Remover is available
in convenient 2 oz. bottles, larger 8 ounce economy cans
and even in 1 gallon cans.
No Minimum
Orders:
Did
you know that Zephyrtronics has
no minimum orders?
You Chose: Your
Non-Flammable Flux Remover
can ship out to you
filled into three, convenient container
options: our popular 2 Oz. Bottle, an 8 Oz. Can, or even
in a one gallon canister
with the MSDS docs included with every order. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
©1996 - 2010 Ameritronics®. All rights reserved. The
information you receive online from Ameritronics® is
protected by the copyright laws of the United States.
The copyright laws prohibit any copying, redistributing,
retransmitting, or repurposing of any
copyright-protected material. Ameritronics® is the
registered trademark property of JTI, Inc.
"Zephyrtronics" and "Zephlux" and "ZeroLead" and "Zero
Balling" and "Zero Residue" and "Post Cooling"
and "PostCooler" and "AirBath" and "Quatro"
and "Full Metal Jacket" are the
protected trademark property of JTI, Inc. |
|
|
|
|
|
|
|
|
|
|
|
SMD Rework,
SMT Rework
AirBath,
SMD Rework
Stations,
Hot Air
Pencil Soldering,
BGA Rework
Stations,
CSP Rework
Stations,
Preheating
Systems,
PCB
Preheaters,
Pre-Heat
SMT / SMD,
Low Temp Rework,
SMT
DeSoldering Tools,
Vacuum
Pickup Tools,
Circuit
Board Holders,
PCB
Fixtures,
Board
Cradles,
Rework
Solder Paste,
No-Clean
Solder Paste,
Low Melt®
De-Solder Wire,
DeSolder
Wire,
Hot Air
Rework Stations,
Fume
Extractors,
SMT Dental
Probes,
SMT-SMD
Rework Kit,
BGA Rework
Kit,
LMK Kit,
BGA
Re-Balling Kit,
SMD
Tweezers,
Power Palm
Plunger
How To - SMT, CSP, BGA Rework
How To -
BGA Alignment:
How To -
SMT Rework:
How To - PCB Preheating,
How To -
BGA & CSP Rework:
How To -
Quickly Solder SMD Packages Effectively:
How To -
CSP Alignment;
How To -
Lead-Free Rework;
How To -
SMD Removal Economical;
How To -
SMD Removal Professional:
How To -
Hot Air Pencil / AirPencil Soldering;
How To -
SMD Quick Chip Removal;
How To -
BGA Re-Balling;
How To -
Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP:
How To -
Solder & Rework Ceramic Capacitors:
How To -
Solder & Rework Glass Diodes
Soldering,
De-Soldering
Soldering
Accessories,
Solder
Wire,
No-Clean
Solder Wire,
Eutectic
Solder Wire,
Solder Wire
Dispenser,
Solder
Paste,
Lead-Free
Solder Paste,
Flux,
Solder
Paste Dispensers,
LowMelt®
DeSolder Wire,
De-Solder
Wire,
Soldering
Irons,
Digital
Soldering Station,
Digital
De-Soldering,
MIL-Spec
Soldering Station:
ESD
Soldering Station,
Soldering
Tips,
Thru-Hole
DeSoldering Tools,
Desoldering
Tip,
Tips for
Desoldering,
De-Solder
Wick,
Smoke
Extractors,
Fume
Extractor Filters,
Carbon
Activated Filters,
SolderMill™,
Pre-Heating
Systems,
Preheat
Thru-Hole,
PCB
Pre-Heating,
Flux
Solvent,
How To - Connector Rework;
How To -
PC/104 Soldering and Rework;
How To -
Thru-Hole / Through Hole Desolder / De-Solder;
How To -
Low Melt® Desolder Wire;
How To-
Stop Lifting Pads;
How To-
Desolder / De-Solder Heavy Ground Planes;
How To -
Lead-Free Soldering and De-Soldering;
Preheaters
for Lead-Free Rework and Soldering
Dispensing
Dispensing
Systems,
Dispensing
Syringes,
Dispensing
Barrels,
Tapered
Tips,
Blunt
Needles,
Stainless
Steel Needles,
Dispensing
Needles,
Industrial
Needles,
Dispensing
Tips,
Dispensing
Accessories,
Solder
Paste in Syringe,
Lead-Free
Solder Paste in Syringe,
Paste Rack™
Solder Paste Holder,
Dispensing
Supplies,
Power Palm
Plunger,
Manual
Dispensing,
Automatic
Dispensing
Benchtop Accessories,
Bench Supplies,
Benchtop Tools
SMD Solder
Paste,
Lead-Free
Solder Paste,
Solder
Wire,
LowMelt®,
No-Clean
Flux,
BGA Flux,
Rework Tack
Flux,
Non-Flammable Flux Remover,
Inspection
Equipment,
Magnification Equipment,
Magnifying
Work Light,
ESD
Magnifier,
Pen Vac,
SMT
Tweezers,
Fume
Extraction,
SMD
Tweezers,
PC Board
Fixtures,
Hot Air
Tips,
AirTips,
Replacement
Soldering Sponges,
Iron Plated
Soldering Tips,
Art
Conservation Hot Air Tools,
Foam Swabs,
Anti-Static
Foam Swabs,
Thru-Hole
Brushes,
LMK Rework
Kits |
|
|
|