Solder Paste Holder & Storage Rack    10cc Syringe / Barrel Holding Fixture  Refrigerator Rack

The

PASTE-RACK

         
 
Neatly Holds 6 or 12 Syringe/Barrels of Solder Paste Vertically!
Another World-First Innovation from Zephyrtronics
 

Solder Paste Holder
The PasteRack for Solder Paste
& 10cc Syringes & Barrels

Innovative PasteRack™ Stores 10cc Solder Paste Syringes During Refrigeration! You are going to want this novel and and helpful product. The PasteRack now makes storing your solder paste in your industrial refrigerator or at your bench a breeze. Available in two models -- for 6 and for 12 barrels ready to ship today.

Industry Standard of Vertical Storage:  The established standard for storing solder paste in 10cc barrels or syringes is vertically to prevent the undesired, backward-seeping of the paste back beyond the piston.

 

The PasteRack is your helpful solution to this age-old problem.

Space Saving & Economical Design: In appreciation that most industrial refrigerators are small in size and capacity, the PasteRack takes up very little space at all. You can rack up up to six or twelve 10cc syringes/barrels efficiently. And they are made in the U.S.A. at the Zephyrtronics factory.

 

THE PASTERACKS™

DESCRIPTION BUY
NOW
Solder Paste Rack, Holds Solder Paste, 10cc Syringes

ZT-8-0006

6-Unit Barrel/Syringe
 PasteRack™
for
10cc's

 

$29.95

ZT-8-0009

9-Unit Barrel/Syringe
 PasteRack™
for
10cc's

 

$39.95

ZT-8-0012

12-Unit Barrel/Syringe
 PasteRack™
 
for
10cc's

$54.95

 

Convenient Dispensing Slots: The PasteRack conveniently suspends your solder paste where it is readily at your fingertips when you need it! Slide the syringes (or barrels) in and out. Easy!

Rubber, Skid Resistant Feet: The PasteRack has integrated rugged, rubber, skid resistant feet which not only prevent unwanted movement of the unit, but further help prevent scratching of glass shelves which may be in your industrial refrigerator.

Industry-Recommended Vertical Storage: How many times have you searched inside your industrial refrigerator for solder paste only to finally find the solder paste has seeped backwards due to laying on its side? Your paste may be fresh, but the syringe is a mess! The PasteRack resolves this at the bench or in the fridge

Available in Two Models: The PasteRack is available in either of two models, one which holds up to 6 (six) 10cc syringes/barrels (the ZT-8-0006), and a slightly larger, but still compact model which holds up to 12 (twelve) syringes/barrels (the ZT-8-0012). Ideal for use with Zephyrtronics Zephpaste.

 

©1996 - 2011, 2012, 2013, 2014-2016, 2017-2018 Ameritronics®. All rights reserved. The information and all images you receive online from Ameritronics® is protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Ameritronics® is the registered trademark property of JTI, Inc. "Zephyrtronics" and  "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" and "PostCooler" and "AirBath" and "Quatro" and "Full Metal Jacket" are the protected trademark property of JTI, Inc.

Revised for August 30, 2018

Click link below to return to the top of the page
SOLDER PASTE HOLDING RACK

PCB, SMD, BGA Rework & Prototyping
AirBath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT / SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixtures, Board Cradles, Rework Solder Paste,  No-Clean Solder Paste, Low Melt® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT-SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger

How To Work With SMD's, CSP's, BGA's & QFN's
How To - BGA Alignment: How To - SMT Rework: How To - PCB Preheating, How To - BGA  & CSP Rework: How To - Quickly Solder SMD Packages Effectively: How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional: How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP: How To - Solder & Rework Ceramic Capacitors: How To - Solder & Rework Glass Diodes

PCB Soldering, De-Soldering
Soldering Accessories, Solder Wire, No-Clean Solder Wire,  Soldering  Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, LowMelt® DeSolder Wire, De-Solder Wire, Soldering Irons, Digital De-Soldering, Soldering Tips, Thru-Hole DeSoldering Tools, Desoldering Tip, Tips for Desoldering, De-Solder Wick, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Pre-Heating Systems, Preheat Thru-Hole, PCB Pre-Heating, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Preheaters for Lead-Free Rework and Soldering

Dispensing, Solder Paste, Liquids & Fluids
Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Tips,  Blunt Needles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Dispensing Accessories, Solder Paste in Syringe, Lead-Free Solder Paste in Syringe, Paste Rack™ Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Automatic Dispensing

Laboratory  & Bench  Supplies & Tools
SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits

Laboratory  & Bench  Supplies & Tools
SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits