Micro Shears, Flush Cutters and Pliers

Snub ®  Nose Pliers, Short Nose Plier, Cushion Grip, Production, 475
Short Snub Nose™ Pliers

Needle Nose, Pliers, 431, 432, 450, RX7890, NN7776G
Long Reach NeedleNose Pliers

Flush Cutters, 170, 170-II, 170M, 170-LX, 170-SD, CHP-170, Micro Shears
Wire, Cable, Wire Tie Cutter

Flush Cutter, Micro Shears, Lead, Retainer, Safety, Clip, Guard, Cutters
PCB Leads Flush Cutter & Clip

 

Our Micro-Shears, Flush Cutters, Needle Nose Pliers, and StubNose™ Pliers are fabricated from heat-treated carbon steel for industrial, electronic, hobby and other applications.

Helpful spring-loaded "return" for up to 50 percent less hand activity. All models feature non-slippery, cushion grips for technician comfort.

 
 

AT-170F Flush Cutter & Safety Guard

Description/Quantity

Price

Purchase

Safety-clip guard. Heat treated, carbon steel blades shear PCB chip leads & wires to 20AWG, cables & wire ties. Spring-loaded "return". Cushion grips. 130mm (5.1"). 20° head angle.

Flush Cutters

170, Flush Cutters, Saftey Clip, Lead Retainer

With
Lead Retainer

Single
AT-170F
$7.50


Two Pack
AT-170F-2
$13.50

Six Pack
AT-170F-6
$38.25

12 Pack
AT-170F-12
$67.50

AT-170  Micro Shears

Description/Quantity

Price

Purchase

Heat treated, carbon steel sharp blades clean-cut soft wires up to 20AWG. Spring-loaded "return". Cushion grips. Also cuts cable and wire ties. 130mm (5.1") with 20° head angle.

Flush Cutters

170, 170-AS, 170LX, CHP-170, Flush Cutting, Shears

Micro Shears

Single
AT-170
$6.00

Two Pack
AT-170-2
$11.50

Six Pack
AT-170-6
$32.40

12 Pack
AT-170-12
$57.60

 
Rework, Repair,  PCB Soldering
Equipment & Tools

BGA & SMD
BGA Rework, SMD Rework, Hot Air Station

PCB Preheaters

PCB Preheaters, Bottom-Side Pre-heat

PCB Fixtures
PCB Fixture 3-Track

Fume Extractors

Flush Cutters

Hot Air Pencil
Hot AirPencil, SMD Soldering Station

The PasteRack
Solder, Paste, Storage, Rack

Auto Dispenser
Autotamic Dispenser for Dispensing Liquids, Pastes, Fluids, Epoxies and More

Hot Air Rework
Digital SMD Hot Air Soldering Rework Station

Quality Magnifiers
ESD Safe, Lighted Magnifier, Magnifying Lamp, Diopter, Bench

De-Soldering
DeSoldering Station, Digital DeSoldering Stations, Temperature Control DeSoldering, DeSolder, Rework, Thru-Hole, Repair, Through-Hole, Low Price

Vacuum Pick-Up
Vaccum Pick Up Tool, SMD, PCB

QFP Straightener
Topline, QFP Lead Straigtener

Solder Sucker
ESD Solder Sucker, DeSolder Suckers

Soldering Supplies for the Electronic Bench

Solder Paste
Rework, Solder, Paste

LowMelt®
DeSolder Wire

LowMelt ®, DeSoldering Wire, SMD Removal

Solder Wire
Soldering Wire, Tin, Lead, Lead-Free, 1 Pound Spools

Dispensing Bottles
Squeeze, Pump, Bottles

Soldering Tips
Soldering, Tips, Replacement, Solder, Cartridges

Solder Sponges
Sponges, Natural Cellulose Sponges

Fluxes/Solvents

DeSolder Wick
Solder Wick, Desoldering, Braid

Dispensing Needles & Tips
Dispensing Needles, Blunt Needles, Plastic Tapered Tips, Industrial Dispensing Needles, Stainless Steel Needles

10cc Plungers

Dispensing Barrels

AT-450 Long Needle Nose Pliers

Description/Quantity

Price

Purchase

Long carbon steel jaws grip, twist, hold wires & parts or in wire forming. Helpful in tight spaces. Smooth jaws stop nicking/scoring wires to 1 mil. Spring-loaded return. Cushion grips. 127mm (5")

Needle Nose

Needle Nose, Micro, Pliers, NN7776G, RX7890,  431, 432, 450, 2443P, 2847

Excellent Pliers

Single
AT-450
$10.00


Two Pack
AT-450-2
$18.00

Six Pack
AT-450-6
$51.00

12 Pack
AT-450-12
$97.80

AT-475 Snub Nose™ Pliers

Description/Quantity

Price

Purchase

Carbon steel jaws grip and hold while twisting or tugging. Good for wire forming. Smooth jaws stop nicking/scoring tiny wires to 1 mil.  Spring-loaded "return". Cushion grips. 130mm (5.1")

Short
Stub Nose™
Short Nose Pliers, 475, 2642S, L4G, 2443P, RX7893


Excellent Pliers

Single
AT-475
$10.00

Two Pack
AT-475-2
$18.00

Six Pack
AT-475-6
$51.00

12 Pack
AT-475-12
$97.80

4-Piece Shear & Pliers Set

Description of 4-Piece Set

Purchase


AT-475
SnubNose

 Pliers


AT-450
Needle Nose
 Pliers


AT-170
Micro Shear
Wire Cutter


AT-170F
 Flush Cutter &
 Safety Guard

AT-S&P
Cutters & Pliers Set
of 2 Shears & 2 Pliers
(Total of 4 Items)

Only
$29.00


Helping Hands
Helping Hands

Solder Wire Holder
lead-free, solder wire, holder

I.C. Extractors
I.C. Extraction Tool, Spring Loaded Extraction Tool

 Tweezers  Probes
Tweezers, Probes, Stainless, Non-Magnetic, SMD, PCB

 Test Wrist Strap
Tester, Wrist Strap Tester, ESD Tester, With Battery

ESD WristStraps
ESD Wrist Strap, ESD-Safe, Wrist Straps, Comfortable, Banana Plug, Static, Control

Acid Scrub Brush
Acid Brushes, PCB, Flux Remover, Brushes

Foam Swabs
Swabs, Foam, Polyester, Variety

The PenVac®
Vacuum Pen, PenVac®

PCB Bench Kits
Soldering, Rework, PCB, Supply, Kits

Loupes
Goose Neck, Magnifying Glass, Desktop, Tripod, Magnifier

Head Band Magnifier

Video: How to Thermal Profile
Video, How, Why, PCB Thermal Profiling

Video: How to Rework BGA's
How To Rework, Repair,  BGA, SMD, PCB's

 Video: Using Solder Paste
How To Use Solder Paste

Video: How To Use LowMelt®

Video: The ABC's of PCB Holders
PCB Fixture 4-Track

Video: Comparing PCB Preheaters

Digital Multimeter
Digital Multimeter

Cutter StripperWire Cutters, Wire Strippers, Spring Loadedj, Adjustable, Up to 10 Gauge

©1996 - 2011, 2012, 2013, 2014-2016 Ameritronics®. All rights reserved. The information and all images you receive online from Ameritronics® is protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Ameritronics® is the registered trademark property of JTI, Inc. "Zephyrtronics" and  "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" and "PostCooler" and "AirBath" and "Quatro" and "Full Metal Jacket" are the protected trademark property of JTI, Inc.

Revised for November 30, 2016

Click link below to return to the top of the page
Micro Shears, Flush Cutters and Pliers

PCB, SMD, BGA Rework & Prototyping
AirBath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT / SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixtures, Board Cradles, Rework Solder Paste,  No-Clean Solder Paste, Low Melt® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT-SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger

How To Work With SMD's, CSP's, BGA's & QFN's
How To - BGA Alignment: How To - SMT Rework: How To - PCB Preheating, How To - BGA  & CSP Rework: How To - Quickly Solder SMD Packages Effectively: How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional: How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP: How To - Solder & Rework Ceramic Capacitors: How To - Solder & Rework Glass Diodes

PCB Soldering, De-Soldering
Soldering Accessories, Solder Wire, No-Clean Solder Wire,  Soldering  Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, LowMelt® DeSolder Wire, De-Solder Wire, Soldering Irons, Digital De-Soldering, Soldering Tips, Thru-Hole DeSoldering Tools, Desoldering Tip, Tips for Desoldering, De-Solder Wick, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Pre-Heating Systems, Preheat Thru-Hole, PCB Pre-Heating, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Preheaters for Lead-Free Rework and Soldering

Dispensing, Solder Paste, Liquids & Fluids
Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Tips,  Blunt Needles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Dispensing Accessories, Solder Paste in Syringe, Lead-Free Solder Paste in Syringe, Paste Rack™ Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Automatic Dispensing

Laboratory  & Bench  Supplies & Tools
SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits