Solder Paste

Flush Cutters, Lead Cutters, Shears
Magnifiers, Loupes, Inspection, Goose Neck, Head Magnifiers, Magnification Products
   Lighted Head Band Magnifier    

Lighted Head Band Magnifier



Buy Now


Single Lighted HeadBand Magnifier


Two Pack of Lighted HeadBand Magnifiers

Six Pack of Lighted HeadBand Magnifiers


AT-MG-90: $18.00

The AT-MG-90 is the popular Illuminated, Dual Lens, Flip-In Magnifier with easy-to-adjust headband & swivel-head.  It is lightweight in design (approximately 1/4 lb.) and features clear wide-angle acrylic lens with illumination, which together helps provide true hands-free work at the bench. Great for inspection jobs and for close-up PCB work at the bench.

Magnifying Options Range 2.2 X & 4.8 X

   Tripod Loupe Magnifier    

Tripod Loupe Magnifier



Buy Now


Single Tripod Loupe


Two Pack
of Tripod Loupes

Six Pack
of Tripod Loupes


AT-MG-91: $17.00

The AT-MG-91 is our compact, light-weight, yet powerful tripod magnifier and has many applications.  Stylish in design and chrome-plated. Pick up a second one for a colleague. Looks great on bench or desk. A terrific little tool!

10X Magnification, 2” (5cm) Tall
with a 3/4” (2cm) Diameter Lens

 Goose Neck Magnifier

Goose Neck Magnifier



Buy Now


Single Goose Neck Magnifier


Two Pack of
Goose Neck

Five Pack of
Goose Neck

Ten Pack of
Neck Magnifiers

Magnifier with  Loupe
AT-MG-93: $20.00

The AT-MG-93 is great for the lab, a technician’s bench top, or even right at the desk in your office!  You will find that our flexible gooseneck magnifier is an indispensible tool to have “at your fingertips”.

Glass Magnifier 100mm @ 2X
With Weighted Base and flexible arm

©1996 - 2011, 2012, 2013, 2014-2016 Ameritronics®. All rights reserved. The information and all images you receive online from Ameritronics® is protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Ameritronics® is the registered trademark property of JTI, Inc. "Zephyrtronics" and  "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" and "PostCooler" and "AirBath" and "Quatro" and "Full Metal Jacket" are the protected trademark property of JTI, Inc.

Revised for December 16, 2016

Click link below to return to the top of the page

PCB, SMD, BGA Rework & Prototyping
AirBath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT / SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixtures, Board Cradles, Rework Solder Paste,  No-Clean Solder Paste, Low Melt® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT-SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger

How To Work With SMD's, CSP's, BGA's & QFN's
How To - BGA Alignment: How To - SMT Rework: How To - PCB Preheating, How To - BGA  & CSP Rework: How To - Quickly Solder SMD Packages Effectively: How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional: How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP: How To - Solder & Rework Ceramic Capacitors: How To - Solder & Rework Glass Diodes

PCB Soldering, De-Soldering
Soldering Accessories, Solder Wire, No-Clean Solder Wire,  Soldering  Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, LowMelt® DeSolder Wire, De-Solder Wire, Soldering Irons, Digital De-Soldering, Soldering Tips, Thru-Hole DeSoldering Tools, Desoldering Tip, Tips for Desoldering, De-Solder Wick, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Pre-Heating Systems, Preheat Thru-Hole, PCB Pre-Heating, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Preheaters for Lead-Free Rework and Soldering

Dispensing, Solder Paste, Liquids & Fluids
Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Tips,  Blunt Needles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Dispensing Accessories, Solder Paste in Syringe, Lead-Free Solder Paste in Syringe, Paste Rack™ Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Automatic Dispensing

Laboratory  & Bench  Supplies & Tools
SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits