Lighted Magnifiers, Illuminated Magnification, Inspection Optics, ESD Safe

Micro Shears, Flush, Cutters, Cushion, Grips

Lighted Magnifiers, Inspection Magnifiers, Illuminated Magnification,
Bench Mount, PCB Rework, Laboratory Magnifiers
MAGNIFYING WORK LIGHTS


	A Technician Inspects Tiny Electronic Chips With His Handy AT3-ESD Lighted Magnifier

OPTICS GLOSSARY:

DIOPTER: Identifies refractive (light bending) capacity of a lens. In magnifiers, there is a direct correlation between focal length and diopter. To find diopter of a magnification lens: 1.) With eyes 10” above lens, move viewed object to the point the greatest distance below the lens where it remains in sharp focus. 2.) Measure distance and divide into 1 meter (39.37”). The result is your lens diopter.

FIELD OF VIEW: The distance across lens surface to which viewer brings both eyes (Note: eyes should be 10” above lens). Important: As magnification increases (the stronger the lens), viewing areas and focal length decreases.

MAGNIFICATION: Degree to which viewed object is enlarged. Magnification is expressed by a number followed by the symbol “x” to express power or size of object in relationship to its actual size.






	©1996 - 2011, 2012, 2013, 2014 Ameritronics®. All rights reserved. The information and all images you receive online from Ameritronics® is protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Ameritronics® is the registered trademark property of JTI, Inc. "Zephyrtronics" and "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" and "PostCooler" and "AirBath" and "Quatro" and "Full Metal Jacket" are the protected trademark property of JTI, Inc. Revised for April 18, 2016

		Click link below to return to the top of the page MAGNIFYING WORK LIGHTS
PCB, SMD, BGA Rework & Prototyping AirBath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT / SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixtures, Board Cradles, Rework Solder Paste, No-Clean Solder Paste, Low Melt® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT-SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger How To Work With SMD's, CSP's, BGA's & QFN's How To - BGA Alignment: How To - SMT Rework: How To - PCB Preheating, How To - BGA & CSP Rework: How To - Quickly Solder SMD Packages Effectively: How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional: How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP: How To - Solder & Rework Ceramic Capacitors: How To - Solder & Rework Glass Diodes PCB Soldering, De-Soldering Soldering Accessories, Solder Wire, No-Clean Solder Wire, Soldering Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, LowMelt® DeSolder Wire, De-Solder Wire, Soldering Irons, Digital De-Soldering, Soldering Tips, Thru-Hole DeSoldering Tools, Desoldering Tip, Tips for Desoldering, De-Solder Wick, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Pre-Heating Systems, Preheat Thru-Hole, PCB Pre-Heating, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Preheaters for Lead-Free Rework and Soldering Dispensing, Solder Paste, Liquids & Fluids Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Tips, Blunt Needles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Dispensing Accessories, Solder Paste in Syringe, Lead-Free Solder Paste in Syringe, Paste Rack™ Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Automatic Dispensing Laboratory & Bench Supplies & Tools SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits