How to DeSolder Thru-Hole Components    How to Use Solder Paste          How to DeSolder & Remove SMD's
PCB Soldering & De-Soldering. Quality!
 How to Desolder Thru-Hole Components,
 Through-Hole Connectors & Chips. Quality
!
• Quality De-Soldering Made Easy
• Stop Lifting Pads & Traces
• Suck Up All the Solder from Hole
• DeSolder at Heavy Ground Planes
• DeSoldering Techniques & Tips
• Repeatable & Dependable Results
• RoHS Compliant & ESD-Safe


Click For Quick & Helpful Guide


How to Achieve
High Quality DeSoldering
at the Bench

 How to Use Solder Paste on PCB's &
 How to Solder SMD's With Solder Paste.

• How to Successfully Use Solder Paste
• How to Profile PCB's at The Bench
• How to Make High Quality Joints
• Why Preheating Enhances Quality
• Quality Soldering Made Easy
• Step By Step Illustrations

Click for Quick & Helpful Guide


How to Achieve
High Quality Soldering of SMD's
at the Bench

 Solder Sucker / DeSoldering Hand Pump
 
DSP2000 Solder Sucker    
• High DeSoldering Capacity!
• High Power Piston Cylinder!
• Smaller Diameter Profile
• ESD-Safe Construction

• Lightweight Design
• Hi-Temp
, Long-Life Teflon Tip
• Big
Solder Collection Chamber


Click for Details & Pricing
Solder Sucker, DeSoldering Pump  
 
 How To DeSolder & Remove SMD Chips &
 Quickly with LowMelt® at Extra Low Temps

• No Hot Tool Contact with PCB!
• No Lifting Pads.
• No Delamination of PC Board.
• No High Temp Degradation of IC's
• Easy to Perform.

• Removes Most All SMD's Rapidly


Click for Quick & Helpful Guide


SMD Removal
at Lowest Temps
Without Any
Hot Contact Tools!

©1996 - 2011, 2012, 2013, 2014 Ameritronics®. All rights reserved. The information and all images you receive online from Ameritronics® are protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Ameritronics® is the registered trademark property of JTI, Inc. "Zephyrtronics" and  "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" and "PostCooler" and "AirBath" and "Quatro" and "are the protected trademark property of JTI, Inc.

Revised for November 17, 2016

Click link below to return to the top of the page
PCB SOLDERING & DE-SOLDERING

PCB, SMD, BGA Rework & Prototyping
AirBath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT / SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixtures, Board Cradles, Rework Solder Paste,  No-Clean Solder Paste, Low Melt® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT-SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger

How To Work With SMD's, CSP's, BGA's & QFN's
How To - BGA Alignment: How To - SMT Rework: How To - PCB Preheating, How To - BGA  & CSP Rework: How To - Quickly Solder SMD Packages Effectively: How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional: How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP: How To - Solder & Rework Ceramic Capacitors: How To - Solder & Rework Glass Diodes

PCB Soldering, De-Soldering
Soldering Accessories, Solder Wire, No-Clean Solder Wire,  Soldering  Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, LowMelt® DeSolder Wire, De-Solder Wire, Soldering Irons, Digital De-Soldering, Soldering Tips, Thru-Hole DeSoldering Tools, Desoldering Tip, Tips for Desoldering, De-Solder Wick, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Pre-Heating Systems, Preheat Thru-Hole, PCB Pre-Heating, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Preheaters for Lead-Free Rework and Soldering

Dispensing, Solder Paste, Liquids & Fluids
Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Tips,  Blunt Needles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Dispensing Accessories, Solder Paste in Syringe, Lead-Free Solder Paste in Syringe, Paste Rack™ Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Automatic Dispensing

Laboratory  & Bench  Supplies & Tools
SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits