SMD Chip Quick Removal Video How to Use LowMelt® DeSolder Wire Video Non-Contact, Touch-Free De-Soldering Video
Technical Videos for PC Board Soldering & DeSoldering
LowMelt® DeSolder for SMD
Removal
Video: LowMelt® DeSolders SMD
Chip Quick
A must-see, "live"
video demonstration of actual component removal with
the amazing LowMelt®
desolder wire at
under 150°C (300°F). No damaged chips, lifted pads
or hurt to PC Boards. No soldering irons, no hot
tweezers, no desoldering tools, just a small
preheater.
Remove
SMD's in seconds. Proven, low temperature,
non-contact PCB rework method used by NASA, the
military and the electronics industry. Under three
minutes.
How
to solder and de-solder with proper thermal
profiling. How rework and repair of printed circuit
boards (PCB) can be performed at a bench, in a lab
or at a repair depot with production quality. Video
teaches the 3 thermal zones for PCB's and what
basic equipment is
needed.
The 4
primary ways of PCB preheating are compared with their
advantages and drawbacks for the viewer. This
video is required viewing before purchasing any
PCB pre-heater that
may not be best suited for your own PCB soldering
and de-soldering needs.
Video details the advantages, versatility and
utilities of
adjustable PC board fixtures
over other PC Board holders. Video spotlights
the unprecedented multiple functions and utilities
of the most popular PC Board fixtures on the planet
for 20 years.
Video highlights really quick, easy process for
desoldering and removing Ball Grid Array devices and
demonstrates a
hot air rework system.
Video shows preheating, ramping, soaking and final
reflow and removal of any BGA, QFN and SMT devices.
Video
of live demonstration of soldering surface mount
devices (SMD) onto printed circuit board assemblies
(PCB) using
solder paste
instead of solder wire and a
hot air pencil in
place of a soldering iron. Video presentation shows
how easy it is to work with solder paste and how to
make good solder joints with fillets and without
bridges. Under five minutes.