ESD-Safe Wrist Straps    2 Meter (6 Foot) Coiled Cord     Comfortable Elastic Band      Swivel Banana Plug      Includes Alligator Clip

ESD-SAFE WRIST STRAP

At this low price, there's no excuse not to buy you or a colleague a new, clean ESD wrist strap. The AT-S-200 is your ESD-Safe Wrist Strap that meets or exceeds tough industry standard static control specifications: MIL-STD-1686, ANSI/ESD 20.20 and EIA62.

Fully adjustable, the elastic fabric band (with its nylon locking clasp) is a comfortable, fabric and is soft to the wrist during your work and features the popular banana "swivel" 360° rotating plug that moves with you.

The coiled cord stretches two meters (6'). 

The AT-S-200 features a One Meg Ohm resistor, the static control industry's standard provides a "continuous static drain when you work with your PC boards and chips.

Everything is included! The wrist strap, the coiled cord, the banana plug, locking clasp, and a free removable alligator clip. No extra charge! Quality! "In stock" now at our warehouse.


ESD Safe Wrist Strap With Alligator Clip
ESD-Safe Static Draining Wrist Strap
Ships Complete as Shown Above

 

WRIST STRAP, ESD-SAFE

AT-S-200 SERIES

Wrist Strap

Qty Model Price Purchase

1

AT-S-200-1 4.75

2 AT-S-200-2 8.50

5 AT-S-200-V 20.00

10 AT-S-200-X 35.00

50 AT-S-200-L 150.00

Product Specs &Technical Data

AT-S-200 ESD-Safe Wrist Band Strap


Continuous Static Drain Wrist Strap
Two Meter (6') Coiled Cord
Adjusts to Fit All Sizes
2 Meter (6 Foot) Coiled Cord
1 Meg Ohm Resistor, Industry Standard
Positive Ground to Skin Contact
Woven Conductive Fibers
 Positive Skin to Ground Contact
Soft, Comfortable Fabric Wrist Band
Quality, Adjustable Nylon Locking Clasp
Individually Factory Tested
Popular Rotating Banana Plug 360°
Individually Sealed Packaging
Includes One Alligator Clip
RoHS Compliant
The Most Commonly Used Wrist Strap
Rework, Repair,  PCB Soldering
Equipment & Tools

BGA & SMD
BGA Rework, SMD Rework, Hot Air Station

PCB Preheaters

PCB Preheaters, Bottom-Side Pre-heat

PCB Fixtures
PCB Fixture 3-Track

Fume Extractors

Flush Cutters

Hot Air Pencil
Hot AirPencil, SMD Soldering Station

The PasteRack
Solder, Paste, Storage, Rack

Auto Dispenser
Autotamic Dispenser for Dispensing Liquids, Pastes, Fluids, Epoxies and More

Hot Air Rework
Digital SMD Hot Air Soldering Rework Station

Quality Magnifiers
ESD Safe, Lighted Magnifier, Magnifying Lamp, Diopter, Bench

De-Soldering
DeSoldering Station, Digital DeSoldering Stations, Temperature Control DeSoldering, DeSolder, Rework, Thru-Hole, Repair, Through-Hole, Low Price

Vacuum Pick-Up
Vaccum Pick Up Tool, SMD, PCB

QFP Straightener
Topline, QFP Lead Straigtener

Solder Suckers
ESD Solder Sucker, DeSolder Suckers

Soldering Supplies for the Electronic Bench

Solder Paste
Rework, Solder, Paste

LowMelt®
DeSolder Wire

LowMelt ®, DeSoldering Wire, SMD Removal

Solder Wire
Soldering Wire, Tin, Lead, Lead-Free, 1 Pound Spools

Dispensing Bottles
Squeeze, Pump, Bottles

Soldering Tips
Soldering, Tips, Replacement, Solder, Cartridges

Solder Sponges
Sponges, Natural Cellulose Sponges

Fluxes/Solvents

DeSolder Wick
Solder Wick, Desoldering, Braid

Dispensing Needles & Tips
Dispensing Needles, Blunt Needles, Plastic Tapered Tips, Industrial Dispensing Needles, Stainless Steel Needles

10cc Plungers

Dispensing Barrels
Product Specs &Technical Data

AT-S-250 Wrist Band Strap Monitor

AT-S-250 ESD Wrist Strap Monitor

Easy to Use
Go/No Go Indicating Lights
 Red LED's = Resistance is Too Low  or Too High
Green LED Lights = Wrist Strap is Good
Audible Signal With Light Indicator
Illustrated Instruction Sheet

Low: R < 800KΩ  High: R > 9MΩ
Good: 800KΩ ≤ R ≤ 9MΩ

Ships With 9 Volt Battery
Individually Quality Control Tested
 

MONITOR, ESD WRIST STRAPS

AT-S-250 SERIES

ESD Wrist Strap Monitor

Qty Model Price Purchase

1

AT-S-250-1 56.00

2 AT-S-250-2 99.00

5 AT-S-250-5 225.00

Helping Hands
Helping Hands

Solder Wire Holder
lead-free, solder wire, holder

I.C. Extractors
I.C. Extraction Tool, Spring Loaded Extraction Tool

 Tweezers  Probes
Tweezers, Probes, Stainless, Non-Magnetic, SMD, PCB

 Test Wrist Strap
Tester, Wrist Strap Tester, ESD Tester, With Battery

ESD WristStraps
ESD Wrist Strap, ESD-Safe, Wrist Straps, Comfortable, Banana Plug, Static, Control

Acid Scrub Brush
Acid Brushes, PCB, Flux Remover, Brushes

Foam Swabs
Swabs, Foam, Polyester, Variety

The PenVac®
Vacuum Pen, PenVac®

PCB Bench Kits
Soldering, Rework, PCB, Supply, Kits

Loupes
Goose Neck, Magnifying Glass, Desktop, Tripod, Magnifier

Head Band Magnifier

Video: How to Thermal Profile
Video, How, Why, PCB Thermal Profiling

Video: How to Rework BGA's
How To Rework, Repair,  BGA, SMD, PCB's

 Video: Using Solder Paste
How To Use Solder Paste

Video: How To Use LowMelt®
Video How To Use LowMelt®, Remove Chip Quickly

Video: The ABC's of PCB Holders
PCB Fixture 4-Track

Video: Comparing PCB Preheaters

Digital Multimeter
Digital Multimeter

Cutter StripperWire Cutters, Wire Strippers, Spring Loadedj, Adjustable, Up to 10 Gauge

   
 

©1996 - 2011, 2012, 2013, 2014-2016 Ameritronics®. All rights reserved. The information and all images you receive online from Ameritronics® is protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Ameritronics® is the registered trademark property of JTI, Inc. "Zephyrtronics" and  "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" and "PostCooler" and "AirBath" and "Quatro" and "Full Metal Jacket" are the protected trademark property of JTI, Inc.

Revised for November 22, 2016

 
Click link below to return to the top of the page
ESD WRIST STRAPS
 

PCB, SMD, BGA Rework & Prototyping
AirBath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT / SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixtures, Board Cradles, Rework Solder Paste,  No-Clean Solder Paste, Low Melt® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT-SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger

How To Work With SMD's, CSP's, BGA's & QFN's
How To - BGA Alignment: How To - SMT Rework: How To - PCB Preheating, How To - BGA  & CSP Rework: How To - Quickly Solder SMD Packages Effectively: How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional: How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC - QFP, QFN, LCC, SOIC, Sub Shielded SMD, TSOP: How To - Solder & Rework Ceramic Capacitors: How To - Solder & Rework Glass Diodes

PCB Soldering, De-Soldering
Soldering Accessories, Solder Wire, No-Clean Solder Wire,  Soldering  Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, LowMelt® DeSolder Wire, De-Solder Wire, Soldering Irons, Digital De-Soldering, Soldering Tips, Thru-Hole DeSoldering Tools, Desoldering Tip, Tips for Desoldering, De-Solder Wick, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Pre-Heating Systems, Preheat Thru-Hole, PCB Pre-Heating, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Preheaters for Lead-Free Rework and Soldering

Dispensing, Solder Paste, Liquids & Fluids
Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Tips,  Blunt Needles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Dispensing Accessories, Solder Paste in Syringe, Lead-Free Solder Paste in Syringe, Paste Rack™ Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Automatic Dispensing

Laboratory  & Bench  Supplies & Tools
SMD Solder Paste, Lead-Free Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Inspection Equipment, Magnification Equipment, Magnifying Work Light, ESD Magnifier, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Art Conservation Hot Air Tools, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole Brushes, LMK Rework Kits